CCR1036-12G-4S is an carrier grade router with a cutting edge 36 core Tilera CPU! Unprecedented power and unbeatable performance – this is our new flagship device. Over 20 times faster than our previous top model, the Cloud Core supports throughput of up to 24 million packets per second, or up to 16 gigabits – full wire speed.
The device comes in a 1U rackmount case, has four SFP ports, twelve Gigabit ethernet ports, serial console and a USB port. A color touchscreen displays device status, traffic graphs, or provide access to simple configuration options.
It has two SODIMM slots, by default it is shipped with 4GB of RAM, but has no memory limit in RouterOS, so will accept and utilize 16GB or more. It comes with power supply and 1U rackmount case.
The cloud core router is powered by RouterOS, a fully featured routing operating system which has been continuously improved for fifteen years. Dynamic routing, hotspot, firewall, MPLS, VPN, advanced quality of service, load balancing and bonding, real-time configuration and monitoring – just a few of the vast number of features supported by RouterOS.
Tested and recommended to use with MikroTik SFP modules: S-85DLC05D, S-31DLC20D and S-35/53LC20D (not included)
Whether you’re a hard-core gamer, a regular online media streamer, or an enterprise with a dream to grow, you need a router that makes creating and managing network setups a lot easier, more practical, and more efficient. You need a bigger memory, a more powerful processor, and a router that is flexible to your ever-changing network or wireless needs. CCR1036-12G-4S fits the bill for a lot of reasons. It boasts nothing but only some of the best vital components, from the ports down to the core processors, slots, and memory you surely wouldn’t ask for anything more. It’s definitely the epitome of industrial-grade wireless technology.
The CCR1036-12G-4S is able to perform way above other commercial-grade or enterprise-level routers and provide truly reliable and over-the-top wireless Internet speed and strength because of the parts that make it up. It currently runs on a 36-core processor with an astonishing speed of 1.2GHz for every core. That’s basically a millions of packets in each second. To top it off, it comes with a 4GB RAM, but since it’s fitted with the equally efficient RouterOS, you can easily upgrade this to 16GB or even higher. It also possesses 12MB of on-chip cache and makes use of the TILE GX architecture.
A Variety of Network Topologies
Networking devices with CCR1036-12G-4S has never been this easy and fast. The router is equipped with a dozen of Gigabit Ethernet ports, 4 SFP ports, 1 USB port, and serial console cable. All the Gigabit ports connect directly to the router’s CPU, allowing you to maximize the juices provided by the core processor.
RouterOS License L6
The CCR1036-12G-4S runs on the current RouterOS license, which is L6, making the router act as a controller as well. You can upgrade it to version 7.x without extra cost and enjoy unlimited support to different protocols, tunnels, interfaces, and queues, among others.
CPU Tilera Tile-Gx36 CPU (36-cores, 1.2Ghz per core)
Memory Two SODIMM DDR3 slots, 2x 2GB DDR3 10600 modules installed
Ethernet Twelve 10/100/1000 Mbit/s Gigabit Ethernet with Auto-MDI/X
SFP Four 1.25G Ethernet SFP cage (Mini-GBIC; SFP module not included)
Expansion microUSB port, host and device mode
Storage 1GB Onboard NAND
Serial port One DB9 RS232C asynchronous serial port
Extras Reset switch; speed controlled fan; beeper; voltage, current and temperature monitoring
Power options IEC C14 standard connector 110/220V (PSU included), up to 60W power consumption
Board dimensions 355x145mm55mm
Temperature Max ambient temperature 50° @ 1.2GHz; 70° @ 1GHz CPU core frequency
OS MikroTik RouterOS v6 (64bit), Level 6 license
Included Router in a 1U case with LCD, PSU, power cable, usb cable